Hero image

GCSE D&T and Beyond

Average Rating4.51
(based on 27 reviews)

A varied range of resources, fully differentiated for a range of D&T and art and design subjects. Including, Graphic Design 1-9, D&T 1-9 and BTEC L2 Engineering. I also have a range of engaging cover lessons and starter activities.

30Uploads

26k+Views

9k+Downloads

A varied range of resources, fully differentiated for a range of D&T and art and design subjects. Including, Graphic Design 1-9, D&T 1-9 and BTEC L2 Engineering. I also have a range of engaging cover lessons and starter activities.
A Level Product Design Revision Tasks
dt-and-beyonddt-and-beyond

A Level Product Design Revision Tasks

(1)
Key revision information including research tasks, relevant to each of the following areas: 1. Materials 2. Design Considerations 3. Consumer Rights and Legislation 4. Social, Moral , Environmental and Legal 5. Health and Safety 6. Manufacturing Processes Good for exam prep lessons, cover work or home learning.
D&T Mini Project Practical: The Cardboard Chair Challenge
dt-and-beyonddt-and-beyond

D&T Mini Project Practical: The Cardboard Chair Challenge

(5)
An OFSTED graded Outstanding lesson for introducing students to the design, make and evaluate requirements of design technology. Ideal for Key Stage 3,4 and 5 including students with no previous hard technology experience. The main focus of the lesson is to work as part of a small team to creatively problem solve, by creating a cardboard chair with limited equipment and resources. The chair must be freestanding, and support the weight of a team member. All Personal Learning Thinking Skills and Functional Skills are developed throughout this lesson and are detailed in the lesson plan. Resource is fully differentiated including a help sheet and extension task. Assessment for Learning is fully detailed, as is a risk assessment and resource requirement list.
A Level Product Design Exam Prep Questions
dt-and-beyonddt-and-beyond

A Level Product Design Exam Prep Questions

(2)
This resource pack consists of 24 weeks (2 terms) worth of mock exam questions, structured around the specification content of EDUQAS A Level Product Design, as well as model answers in the PowerPoints, written using the mark schemes and examiners reports. The questions can be given as standalone homework or used as extension tasks. The questions are mixed, (high and low mark questions), and gathered from past papers. I would recommend you give the students one question a week to complete for homework and then review it as group using these PowerPoints. Can also be used to cover the specification content from other A Level exam boards, as the content required is very similar.
Graphic Design Project
dt-and-beyonddt-and-beyond

Graphic Design Project

(0)
Graphic Design Children’s Book Illustration Home Learning Mini Project: 5 hours worth of teaching content. Self assessment criteria for each task. Tasks range from investigation into illustrators, through to design development, final design and self evaluation. This project will allow students to take inspiration from existing children’s book illustrators, to redesign the front cover of a children’s book of their choice. The project can be created by hand, or using digital design tools like Microsoft Office, or Adobe Design Software. Suitable for KS3 and KS4 art and design and D&T.
Graphic Design Project
dt-and-beyonddt-and-beyond

Graphic Design Project

(0)
A 5 hour home learning graphics project focused on the importance of recreating public transport signage, to visually remind people to stay as safe as possible during the COVID-19 pandemic. Suitable for KS3 and KS4 students, studying art and design or technology. Complete with self assessment criteria for all tasks. Work can be produced by students digitally or by hand. Please check out my other graphic design and D&T resources on my TES shop for more projects and guidance resources and remote learning tasks and projects.
KS3 D&T Project: Wacky Races
dt-and-beyonddt-and-beyond

KS3 D&T Project: Wacky Races

(0)
A design and modelling design & technology project which introduces students the following skills and terminology: Design Iteration 3D Modelling Forces and Movement Aerodynamics Resources required: Craft knives/scissors A4 corrugated cardboard A class set of 4/5mm wooden dowell cut at 55mm. (2 per student) Plastic cotton reels (2 per student)
A Level D&T NEA Guide Booklet
dt-and-beyonddt-and-beyond

A Level D&T NEA Guide Booklet

(0)
This booklet breaks down each page of the NEA requirements in detail via a Product Design route, as well as offering a resource list of recommended literature, and sketchbook checklist to ensure students complete all work required for assessment. This booklet has been constructed around the EDUQAS A Level Design Technology specification, although it can be easily adjusted to suit any exam board. This resource is extremely helpful in allowing students to see exactly what content is required in each page of their NEA.
NCFE L1/L2 Technical Award in Graphic Design
dt-and-beyonddt-and-beyond

NCFE L1/L2 Technical Award in Graphic Design

(0)
Full delivery resource for covering the 6 content areas required for successfull delivery of the NCFE technical award in graphic design, L1 and L2. Includes: Teacher resource for a skills based re-brand project with tasks and exemplar work. Student work checklist Student guidance document to be used alongside the checklist. Mock NEA (17.5 hours in length, matching the real assessment NEA of the same length). - Music Festival Project
D&T Mini Practical - The  Egg Holder Project
dt-and-beyonddt-and-beyond

D&T Mini Practical - The Egg Holder Project

(1)
A mini design and make project which introduces students to the required content for assessment for both GCSE and A Level Design Technology. The students are required to manufacture a holder for a boiled egg, using a small amount of given dissimilar materials. They are to produce a mini portfolio of design work alongside the 3D outcome. Pack consists of the unit of work, from design brief to evaluation, evaluation help sheet, as well as a summative assessment sheet for the teacher, which allows you to assess your students on the quality of the portfolio, design work and 3D outcome, as well as offering them the chance to feedback to you what they enjoyed/disliked about the project – an OFSTED favourite.
Upcycling Board Game Project
dt-and-beyonddt-and-beyond

Upcycling Board Game Project

(0)
A 9 hour KS3 technology project focusing on Upcycling and board game creation. The students are required to investigate existing board games, design and make their own and create a small wooden dice, clay counters/game pieces, and a fabric sleeve to hold their game. The resource is clearly broken down into tasks and visual examples of previous work to help scaffold and support student learning. Material requirements: A4 modelling card air dry clay (or playdough/modelling clay) 30x30mm square of wood (pine ideally) recycled fabric for the sleeve (old curtains etc)
A Level Design and Technology Workbook & Resources
dt-and-beyonddt-and-beyond

A Level Design and Technology Workbook & Resources

(0)
“New” specification teaching guide. This resources gives you a page by page walk through of the coursework element of A Level D&T, all that needs adding is your own submission deadline dates. This resource is Product Design focused, but can be adjusted to suit alternative subjects. Created following the EDUQAS exam board guideline, but can be refined to suit any other exam board.
Graphic Design: Poster Project
dt-and-beyonddt-and-beyond

Graphic Design: Poster Project

(0)
A promotional campaign focused graphic design project which encourages students to think about composition, typography, colour and imagery to create a poster for an event of their choice. The posters should ideally be created digitally, but could be designed by hand if required. The resource is broken up into tasks which have examples and clear instructions. A good project for introducing KS3 or KS4 students to the basics of graphic design.
Drawing Skills
dt-and-beyonddt-and-beyond

Drawing Skills

(0)
A skills based PowerPoint introducing students to two unique approaches to avoiding design fixation. This PowerPoint can be delivered as a lesson, used in parts as starters or plenaries or integrated into more detail project work. The design approaches provided work well with design & technology focused lessons, but could also be used for engineering lessons, or part of KS3 technology rotations where skills building is the main focus of the lessons.
Metal Mini Project
dt-and-beyonddt-and-beyond

Metal Mini Project

(0)
This project will introduce students to the world of metals, and give them the opportunity to manipulate a non ferrous metal through cutting and shaping. The project is based around a given design brief - creating a small metal gift for a zoo gift shop. There is visual examples to help guide the students, as well as assessment criteria and design based extension tasks, including designing a logo for the zoo, packaging for the gift and a shop front for the gift to be sold in. There is also a further extension design task which focuses on modelling and designing a 3D schematic map for their zoo.
Graphic Design Project
dt-and-beyonddt-and-beyond

Graphic Design Project

(0)
This home learning project will give students the opportunity to think creatively about a place they have visited, and allow them to create a visual travel guide to help visitors find out more about their chosen location/event. PowerPoint is designed to be delivered as a 5 hour mini project. Designs can be created by hand or digitally. Tasks are fully differentiated with examples and self assessment criteria. Suitable for KS3 and KS4 students, studying Art and Design and D&T.
GCSE BTEC Engineering (Level 2) Component 1&2 Resource Bundle
dt-and-beyonddt-and-beyond

GCSE BTEC Engineering (Level 2) Component 1&2 Resource Bundle

(0)
GCSE Engineering Component 1&2 resource bundle. There are five PowerPoints in total, each PowerPoint covers a learning aim - Two for Component 1 (Learning aim A and B), and three for Component 2 (Learning aim A,B and C. Together, these make up the entirety of the non examined assessment of the Pearson/BTEC Engineering GCSE qualification. The resources are clearly developed to allow the students to use them as work booklets. Each component resource has been developed based on the suggested briefs from Pearson. The tasks on each PowerPoint can be completed using the guidance/sentence starters on each slide to assist learners who require scaffolded support. All tasks are numbered, and have been created in line with Distinction criteria examples from the exam board.
Graphic Design Project KS3 or KS4
dt-and-beyonddt-and-beyond

Graphic Design Project KS3 or KS4

(0)
A graphic design project focusing on producing a promotional poster for an upcoming school event. The resource has working examples of the project and includes task by task guidance on how to complete the project. Can be set as independent work or as part of a lesson by lesson scheme of work. The resources starts with examples of the graphic design fundamentals and builds on these through the use of all skills during the project. Work can be produced on Photoshop, photopea.com (free), Canva or Google Slides. Can be used for KS3 or as part of a skills based mini project for KS4 graphic design, through an art and design GCSE. 18-20 hours expected completion time. Can be extended and reduced according to need.
GCSE D&T 1-9 NEA Coursework Student Work Booklet
dt-and-beyonddt-and-beyond

GCSE D&T 1-9 NEA Coursework Student Work Booklet

(0)
A complete coursework template for the GCSE D&T 1-9. The document contains templates for all sections of the non examined assessment, complete with some example pages and a student guidance booklet to be used by students alongside the template document, to check off pages as and when completed. Written using the OCR specification as guidance, although can be used for all exam boards assessing D&T non examed assesment through grades 1-9. Can be used for RM, Product Design or Textiles specialisms.